INNOTEC Premium Silicone Sealant "Easy Seal XS" - 310ml Cartridge

Description

Easy Seal XS. One for all.

Easy Seal XS is a unique, neutral-curing, acid-, solvent- and oxime-free premium silicone sealant based on odorless alkoxy polysiloxanes for the secure and permanently elastic sealing of various construction and connection joints on a wide variety of substrates.

HIGHLIGHTS

Absolutely harmless and odorless
Acid-, solvent- and oxime-free
High UV and temperature resistance (-40 °C to +150 °C)
100% colorfastness - no discoloration or yellowing
Excellent water resistance and mold resistance
Permanently elastic (215% elongation at break)
NSF-certified, cleanroom compatible, chlorine, salt water and lactic acid resistant
Certified with the GEV-Emicode EC1-Plus - very low emissions

THE BEST “SILICONE” YOU’VE EVER HAD.

Acid-, solvent- and oxime-free, therefore absolutely harmless to health and odorless
Can also be used on sensitive surfaces without any problems - no joint or edge soiling (e.g. marble, granite)
Does not attack films and coatings on laminated glass and mirrors
No shrinkage, cracking or collapse
Has a CE marking, which complies with all uniformly applicable rules of the EU Construction Products Regulation (the detailed declaration of performance can be found at www.innotec.at)
Very high UV resistance and particularly high temperature resistance (-40 °C to +150 °C)
100% colorfastness - no more annoying discoloration and yellowing
Excellent water resistance - does not absorb water or moisture, therefore particularly suitable for all wet areas - no mold formation
Good salt water resistance
Ideal for use in and around water basins
Permanently elastic (215% elongation at break, 100% recovery, 25% permanent elongation)
Optimal adhesion on almost any surface - countless areas of application
“Chameleon effect” with colour code Transparent (Opaque) - jointing is hardly noticeable
Easy and quick to apply - fast skin formation
Repair possible within approx. 10 minutes - if the sealing bead is damaged, it can be repaired

APPLICATION

APPLICATIONS AUTOMOTIVE INDUSTRY

For jointing aluminum and stainless steel sheets in vehicle bodies (specially developed metallic gray)
For subsequent sealing of e.g. silver / grey painted vehicles (specially developed metallic grey)

APPLICATIONS INDUSTRY

Marble, granite, natural stone, concrete, ceramic and enamel tiles, wood, metal, sheet metal (galvanized and powder-coated), aluminum, stainless steel, glass (also ideal for laminated glass), mirrors, numerous plastics (e.g. windows, doors, acrylic-coated bathtubs and shower trays) and much more
Also ideal for kitchens, window sills, tiled stoves, outdoor pools, indoor pools (good chlorine resistance), swimming pool roofs, conservatories, glass facades, skylights, roof connections, saunas, steam baths, wellness areas, etc.

PROCESSING

NOTES

Calculation formula for the maximum joint depth and width: The maximum joint depth is one-third of the joint width plus 6 millimeters:
T (max. joint depth) = B (joint width / 3) + 6 mm
Pretreatment of the substrate
To clean the surfaces to be sealed, use Innotec Seal and Bond Remover (Art. No. 1270) or Innotec Multisol (Art. No. 124). Apply the solvent to a clean cloth or directly to the substrate. To allow the solvent to evaporate properly, always wipe dry. If there are any silicone residues on the substrate, spray them with Seal and Bond Remover and allow them to react for approximately 4 to 6 minutes to completely remove them. For heavier residues, repeat this process several times.
Sealing on special substrates
For sealing on special surfaces (such as powder-coated sheet metal, acrylic coatings, and absorbent substrates), these must be pretreated with Seal Guard (Art. No. 1487) to ensure optimal adhesion. Apply Seal Guard with a soft brush/wool mop (Art. No. 1480) and apply Easy Seal XS within 10 minutes to 4 hours.
Application in swimming pools / water basins
Ensure the surface is clean, dry, and free of grease. Always prime joints with a suitable primer (Seal Guard). If necessary, apply Innotec Back Fill Foam to precisely size the joint and/or prevent three-point adhesion.

Before refilling the pool, Easy Seal XS must be completely dry (ideally at least 4 days)!
Due to the variety of different additives used for water treatment, the service life of Easy Seal XS when used in swimming pools/water basins cannot be clearly specified!
Easy Seal XS processing
Apply Easy Seal XS directly using the Easy Grip Gun cartridge gun (item no. 1490-1).
To smooth the sealing bead, Seal Fluid (Art. No. 1274) should be used. Apply Seal Fluid directly onto the sealing bead and the
Spray the smoothing tool and smooth the bead. Once the sealing bead has sufficiently cured, remove any excess Seal Fluid with water and a clean cloth.
Caution: When smoothing with Seal Fluid on natural stone, slight discoloration may occur!
cleaning
To remove excess Easy Seal XS from the surface and tools, it is best to use Innotec Seal and Bond Remover (Art. No. 1270) or Innotec Ultra Clean (Art. No. 121)

DOWNLOAD

TECHNICAL DATA

Base Alcoxy
Density approx. 1010 kg/m3
Consistency Pasty
Solvents None
Hardness approx. 25 (Shore A)
Breaking strength (tensile strength) approx. 0.52 N/mm2 (according to DIN 53504)
Elongation at break (%) approx. 215% (according to DIN 53504)
Modulus approx. 0.36 N/mm2 (at 100% elongation) (according to DIN 53504)
Shear strength 0.6 N/mm2 (according to DIN 53283)
Recovery capacity approx. 100%
Temperature resistance -40 °C to +150 °C
UV resistance Very Good
Water resistance Very Good
Solvent resistance Good, resistant to various solvents
Fungal resistance very good
Good stamina
Tests Meets NSF requirements for Category R2, Registration Number: 143799
Processing conditions +5 °C to +30 °C
Skin formation after approx. 10 minutes (at 23 °C / 50 % relative humidity)
Touch dry after 60 minutes (at 23 °C / 50 % relative humidity)
Curing time: approx. 2 mm in 24 hours (at 23 °C / 50 % relative humidity)
Minimum joint width 4 mm
Maximum joint width 20 mm
Permanent elongation 20%
Not paintable
Shelf life 1 year in unopened original packaging. Store in a cool, dry place.
Details Due to the constantly changing water quality in swimming pools and water basins, the service life of Easy Seal XS when used in swimming pools/water basins cannot be clearly stated. OEM approval
CE Certification Easy Seal XS is a CE-marked product in accordance with Regulation (EU) No. 305/2011: CE EN 15651-1:2012, F INT-EXT 20LM CE EN 15651-3:2012, XS1 You can download the corresponding Declaration of Performance (DoP No. 0114530100) from our website <- here.

Manufacturers & distributors

Details on the General Product Safety Regulation (GPSR)

Manufacturer / producer

Innotec Austria Group
Innotec Industries VertriebsgmbH.
Lofererstraße 83
6322 Kirchbichl
Austria

Phone +43 5332 70800
Email info@innotec.at

Distributor / dealer

Mike's Toolshop GmbH
Industrial Estate 6
5121 Ostermiething
Austria

Phone: +43 6278 93080
Email: servus@mikestoolshop.at

Guarantee & Warranty

From the date of delivery you have a 24-month statutory warranty .

Cutting tools, wearing parts and operating materials are excluded from the warranty, as their service life depends on the respective use, storage and/or intensity of use.

Warranty claims can only be asserted in the case of production errors or verifiable defects.

Here you can find more information about the warranty: https://www.oesterreich.gv.at/themen/gesetze_und_recht/verbraucherschutz/Gewährleistung-und-Verbraucherschutz.html

PAYMENT & SECURE SHOPPING

Our payment methods

We offer a variety of established and trusted payment methods for your order. If you need further confirmation, you can always call us by phone or WhatsApp.

To the contact page